Solusi Migas Terpercaya
The PV-PPI Pin-point Injection Packer is a retrievable test, treat, squeeze, straddle packer. which is designed with a minimum of 1 ft spacing. The 1-ft spacing helps to ensure that the maximum number of perforations within a long producing interval can be broken down to uniformly accept stimulation fluids. It has a bypass located just below the treating ports between the packers. A straight J-slot drag-block body is standard on the PPI Packer.
The PPI Packer can be ordered as an assembly or as a conversion kit. The conversion kit contains many of the parts required to convert an RTTS Packer to a PPI Packer. You will also need additional RTTS Packer rings and the spacer ring required for the upper packer element. Adapters are provided to run 2 7/8in. EUE tubing for spacer if intervals greater than 1 ft are required. A retrievable plug is also included with the conversion kit.
Typically the PPI packer will work in tool string with Fluid control valve and RTTS circulating valve.
| Size(in.) | Casing Range(lb/ft) | Tool O.D. | Working Pressure (psi) | Working Temperature (F°) | Thread Connection | Part Number |
|---|---|---|---|---|---|---|
| 5.500 | 13.0 – 20.0 | 4.500 | 10000psi | 400F | 2 7/8” EUE | PV-PPI-550A |
| 5.500 | 20.0 – 23.0 | 4.250 | 10000psi | 400F | 2 7/8” EUE | PV-PPI-550B |
| 7.000 | 17.0 – 38.0 | 5.750 | 10000psi | 400F | 3 1/2” EUE | PV-PPI-700 |
| 9.625 | 29.3 – 53.5 | 8.000 | 10000psi | 400F | 4 1/2” EUE | PV-PPI-960 |
NOTE: Other sizes and connections available upon request.
